*Brand New Item in Pristine Condition!
**Warm Audio Authorized Dealers in Quebec City, Canada!!

The WA-47jr is an FET transformerless version of the highly renowned classic '47 microphone that has been used on countless hit records for the last 50+ years. The WA-47jr is fully discrete, has 3 polar patterns and is designed for pro studio, home studio, live, and broadcast applications. The WA-47jr sounds great on vocals, acoustic/electric guitars, acoustic/electric bass, drums, piano, strings, brass/woodwind instruments, and an array of other sources.
​
The WA-47jr utilizes a custom k47 style capsule reproduction, designed with the same hole pattern and frequency response as the vintage design. Warm Audio's version of this capsule (model# WA-47-B-80v) is manufactured by an Australian capsule manufacturer with careful precision and repeatability that allows the most important sonic piece of the classic mic to be heard and influence the tone and signature of the WA-47jr. The WA47jr's low-noise and discrete signal path, when paired with this excellent true '47 style capsule, allows it to obtain a very similar tone to the classic '47 microphone, but at a much lower price tag. The WA-47jr utilizes the same k47 style capsule found in Warm Audio's flagship WA-47 tube condenser microphone.

Features:

• Package Includes: Microphone, Shockmount, Hardmount, Zipper storage pouch.3 Polar
• Patterns: Cardiod, Figure-Of-Eight & Omnidirectional
• ​High Pass Filter: A 70hz high pass filter is available for reducing rumble and other subsonic information.
• ​-10dB Pad: A -10dB pad switch is available on the WA-47jr. The pad exists internally within the active circuitry.
• Transformerless condenser microphone style '47
• Custom '47 capsule reproduction (k47 style)
• Capsule make-up: Sputtered gold, double large diaphragm, single backplate, NOS 6-micron mylar (PET film).
• Fully discrete signal path, Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors.
• Polar patterns: cardioid, figure-of-eight and omnidirectional.
• High-pass filter: 70Hz
• Pad: -10db
• Self-noise: 9dBA
• Dynamic range: 138dBA
• Maximum SPL: 147/157dB (@1kHz 1kOhms 0.5% THD, 0/10dB)
• Frequency range: 20 Hz~20 kHz
• Sensitivity: 10mV/Pa or 40dB
• Output impedance: 100 ohms
• Nominal load impedance: >= 1kOhms
• Maximum output: 16dBu @1kHz, 1kOhms, 0.5% THD
• S/N ratio: 85dBA (IEC651)
• Equivalent noise: 9dBA (IEC651)
• Dynamic range: 138dBA (IEC651)
• 48V phantom power supply
• 3-pin gold-plated XLR
• Includes : Shock mount, rigid mount, zippered storage pouch
• Nickel-plated
• Weight: 1.1 lbs
• Diameter: 52mm
• Length: 210mm

---

[1] Our listings may use generic pictures of the same model or pictures from a different unit of the same model. Ask us if you want to see some pictures of the available units.

[2] Our Shipping Flat Rates or free shipping include full insurance of the total value of the item, and apply for most Metropolitan areas in North America. Locations outside major Metropolitan areas might be subject to EXTRA shipping costs for the buyer. If that situation applies, please send us a message including your ZIP code to verify your personalized and accurate quote on shipping rates and extra fees.

[3] All Custom fees are the responsibilities of the buyer. Buyer must contact Custom to insure a correct custom rate. We cannot do any custom quote or be responsible for any customs fees.

[4] All instruments are inspected and set up before shipping, therefore all boxes could be opened. We may also ship in a different box if we judge it is more secure to use a better packaging. If an instrument needs a setup at destination, there are the sole buyer responsibilities as the instrument has been verified and set up before shipping.

[5] There is NO return for international transactions and overseas shipping. Our return policy does not apply to International transactions, only to the Canadian market. It is the Buyer’s responsibility to verify if the manufacturer will accept the warranty for an international transaction, otherwise they will be considered as used.

[6] If an item arrives Damaged, please send us pictures of the external box and damage within the first 24 hours. Failure to do so will automatically void the insurance with the carrier. Keep the box until further notice and wait for our instructions for the next step. Having an instrument setup by yourself or a non-certified technician could void the warranty and insurance on shipping.

[7] All used items are final sales, the return policy does not apply.

Visit our website or call us anytime if you need more information +1-418-831-9010 !