Cartridge & Stylus Frequency Response 20-20,000 Hz Channel Separation 18 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Output Voltage 4.0 mV (1 kHz, 5 cm/sec.) Output Channel Balance 2.5 dB (1 kHz) Stylus Shape 0.6 mil conical Cantilever Aluminum pipe Static Compliance 17 x 10 – 6 cm / dyne Dynamic Compliance 6.5 x 10 – 6 cm / dyne (100 Hz) Mounting Half-inch Dimensions Cartridge 17.2 mm (0.68') H × 18.9 mm (0.74') W × 28.3 mm (1.20') D; Cartridge & Headshell 21.2 mm (0.83') H × 21.4 mm (0.84') W × 62.4 mm (2.46') D Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers Model AT-VM95C/H Mounting Feature Half-inch mount Recommended Load Capacitance 100 to 200 pF Replacement Stylus AT-VMN95C Stylus Size 0.6 mil Type VM Stereo Dual Magnet Weight Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz) Wire Used for Coil T.P. Copper