KJams Tremolo - Tap Tempo Tremolo

The KJams Tremolo features output level control, true bypass, built-in tap switch, external tap switch input, external expression pedal input, and three program control pots. The pedal is based on the Spin FV-1 DSP chip. It is designed and assembled in Holland, Michigan, USA.

The Tremolo pedal has two programs, selectable by the toggle switch:
-Norm (down) – Tremolo with Speed, Depth, and Wave shape controls.
-Harm (up) – Harmonic Tremolo with Speed, Depth, and Wave shape controls. There is a crossover at 800 Hz; the high and low frequencies are alternated to create a vibrato-like modulation similar to early 60s Fender brown face amps.

Footswitches
-Bypass is a standard bypass/enable latching switch.
-Tap sets the speed of the Tremolo. Two taps set the speed. Tap just once and the speed will be set to the lowest.

Pots
-Speed sets the speed of the Tremolo.
-Depth set the depth of the Tremolo.
-Wave selects between four wave shapes: square, triangle, sawtooth up, and sawtooth down.
-Volume controls output level.

Jacks
-In and Out jacks are standard mono, right to left.
-Tap acts exactly as the built-in tap. Use a standard normally open switch.
-Expression replaces the middle/lower control, Speed.

Power
-Input power is standard center-negative 9VDC.
-Current draw is 62mA.
-The pedal is safe with higher voltages, up to 18VDC, but using higher voltages will not affect the sound, and we discourage using them.

Please note the bulk of what we sell is MADE IN THE USA and as a result is not subject to tariffs etc. With respect to items that are not Made in the USA, we cover any tariffs on our end.