Irmo, SC, United States
About this listing
The Furman M-8S Power Conditioner is the perfect low-cost AC power solution for any rack mount system. While preventing excessive inrush currents with power sequencing and noise filtering and reducing RF and electromagnetic interference, the M-8S ensures the safety of your equipment.The Furman M-8S Power Conditioner is a rack-mountable AC power solution for your system. Install the Furman M-8S Power Conditioner in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-Amp load. The Furman M-8S Power Conditioner is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired. Install the Furman M-8S Power Conditioner in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load. Includes 3 delayed outlet banks - each with 2 outlets - plus 2 unswitched outlets.Furman M-8S Power Conditioner FeaturesStandard level AC protection and filteringSix sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outletMomentary and Maintained sequencing via rear panel terminal block or front panel switch (momentary only)All settings and configurations available on rear panelNoise filtering to reduce radio frequency and electromagnetic interferenceSurge protection feature ensures equipment stays safeRear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters15 Amp rating with circuit breakerFurman M-8S Power Conditioner SpecificationsMaximum Output Current: 15 Amps, 120 VAC (Thermal breaker)Line Cord: 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plugStandard Level AC Surge Protection: Merit Class (sacrificial)Spike Protection Mode: Line to neutral, zero ground leakageMax Continuous Operating Voltage: 130V RMSMax Clamp Voltage: 500 Volts PeakPeak Impulse Current: 12,000 AmpsEnergy Rating: 225 JoulesAC Filtering: Standard level Pi LCR FilterNoise Attenuation: >26dB, 100 KHz to 1 MHzOperating Temperature Range: 5C (40F) to 40C (105F) degreesHumidity Range: <90% rH (Relative Humidity)Rocker Switch: Front panel, Sequence (ON, OFF)Thermal Circuit Breaker: Front panel, push to resetFront Panel Indicators: Delay 1, Delay 2, Delay 3, Power, Protection OKRear Panel DIP Switches: 12V Mode On/Off, GND Mode On, Momentary/MaintainedPotentiometer: Rear panel, time calibration fine tune delay adjustRemote Terminal: +5-30VDC In, 12VDC (12mA) OutPower Consumption: 5 WattsDimensions: (L x D x H) 19" x 8.75" x 1.75" ANSI 1RUWeight: 7 lbs.Furman M-8S Power Conditioner IncludesFurman M-8S Power ConditionerManufacturer Warranty
PriceA$640.66
+ A$144.49 Shipping
A$87.56 shipping when combined
14-Day Return Policy
Enjoy peace of mind with your new gear
