Turnersville, NJ, United States
About this listing
The Allen and Heath ME-1 Personal Monitor Mixer is designed to give individual musicians, performers, and presenters the freedom to control their own tailored monitor mixes for use on stage or in houses of worship, rehearsal rooms, studios, conferences, or live events.This standalone digital personal mixer receives input from up to 40 sources via a single CAT5 cable (sold separately) from the main console (sold separately) and mixes these to a stereo and mono output to drive headphones, in-ear monitors, loudspeakers, or other monitoring devices over 3.5mm or 1/4" outputs. The mixer features a simple user interface with intuitive, clear visual feedback, and custom naming system.This mixer is the cornerstone of the ME Personal Mixing System (sold separately) and is ready to use with the Allen & Heath iLive and GLD series Digital Mixers. It is complemented by the ME-U Hub (sold separately), which opens up the benefits of ME to users of other professional digital mixers via the Dante AVB-Ready Audio Networking Solution, EtherSound Audio Network Card, or MADI Audio Plug-In Card (all sold separately).It also has an Aviom compatibility mode for use with Aviom Pro16 systems. You can eliminate the need to use up main console buses by grouping the 40 channels within the mixer to simplify control for each musician. You can assign as few or as many of the 16 keys as needed to control the mix.Allen & Heath ME-1 SpecsInputs 40 Inputs (CAT5), Stereo Aux, ambient micOutputs 2 x stereo (Line or Headphones), mono line outControl Input: Level, Mute, Pan, Solo, Trim AllMaster: Level, Mute, 3-band EQ, LimiterGroup: Level, Mute, Level/Pan for sources within a GroupGroups 16; up to 40 sources assignablePresets 16; Store input levels, Mutes, Pans, Key assign, Names, Group sourcesConfiguration Stores setup and all presetsName Channels, Keys, Unit, Presets, ConfigurationData Port USB: Individual presets or config transfer, firmware updateCAT5 Audio and PoE: Link In and Link Out, locking etherCON connectorsStereo Output Stereo 1/4" and 3.5 mm jacksHeadphones: 300 mW + 300 mW into 100 Ω load< Maximum +21 dBuMono Output Balanced TRS jackNominal 0 dBu, maximum +18 dBuAUX Input Stereo 3.5 mm jackNominal -8 dBu, Maximum +10 dBuInput Impedance >10 kΩAD/DA Conversion 24-bit Delta/Sigma, 48 kHzResidual Output Noise 48 kHz -95 dBu (Level down, 20 to 20 kHz)Frequency Response +0/-1 dB, 10 Hz to 20 kHzPower Mains: 100 to 240 VAC, 50 / 60 Hz In, 12 VDC 1.25 A OutPower over CAT5 Cable (PoE): 10 W (Requires 13 W from PoE hub)Dimensions (W x D x H) 8.9 x 5.9 x 2.2" (225 x 150 x 55 mm)Weight 2.0 lb (900 g) including phones hook
Price$799.99
Free 2-Day Shipping
Only 1 left
Grab it before it's gone
14-Day Return Policy
Enjoy peace of mind with your new gear
