VX100 THE SUPER KRAKEN KEY FEATURES & SPECIFICATION

Format: Two-channel/three-mode all-valve head

Power: High power: 100 Watts. Low Power: 30 Watts

Valves: 4 x ECC83, (12AX7), 4 x 6L6 or EL34

Size (mm): 480(w) x 235(h) x 235(d) including handle and feet (unboxed)

Weight: 12.5kg / 27.5lbs Unboxed. 16kg / 35.2lbs Boxed.

Extra features:

1 x Dual Latching Footswitch for GAIN I/II and MASTER I/II

1 x Dual Latching Footswitch for Preamp Bass Focus and Crunch

Slip cover included

Gain I Crunch… and Clean!

​

VX100’s clean mode is entirely new, allowing sparkling clean tones with superb headroom. Footswitch to crunch mode, and you’re rocking hot-rodded British gain tones. Switch in the Preamp Focus to boost, tighten and punch through.

Gain II

The Gain II channel picks up from where Gain I leaves off. There’s extra overdrive as you’d expect, but also a tighter bottom-end response and a more focussed midrange character, for a more American flavour in your riffs. Yes, it Djents if you want.

Preamp Focus

This preset footswitchable boost adds a little gain while also tightening up the bottom end and pushing mids. It’s akin to what a clean-sounding TS-type pedal would do. It works in all three modes: Clean, Gain I and Gain II.

Power Amp Bass Focus

This function affects the negative feedback in the power section. One setting delivers looser bass response with plenty of vintage-style resonance. The other setting is tighter and more focussed in the bottom end.

Dual Master Volumes

You can configure these to change with the channels (Gain I/Master I and Gain II/Master II) or have them independently footswitchable for two separate master volume levels whenever you want.

Low Power Mode

Select between 30 watts low power or 100 watts high power. Both are plenty loud, but the feel and dynamics are different.

Traditional Footswitching…

There are are a range of footswitchable functions in the VX100: Gain I/GainII, Clean/Crunch modes, Preamp Focus, Master Volumes and the FX Loop… Two dual-button footswitches come with the amp as standard.

MIDI Control

All of the functions mentioned above are MIDI switchable with a compatible MIDI controller. That means you can pre-program multiple function changes to happen at once… along with all your other MIDI compatible devices, should you so desire.